CommonTec - DExControl
The extruding procedure with Ramextrudern
Ramextruder

The Ramextrusion serves prior the production of profiles in PTFE. The profiles can be manufactured endlessly and cut by the continuous extruding on each length. The basic material, which ptfe powders brought consolidated into an extruding pipe heated on sintertemperatur and. At the same time with the compression the Extrudat is reforwarded by the extruding pipe and comes out at the end as finished profile suitable for the subsequent treatment.

The ramextrusion is suitable for rode, tubes and other different profiles. Beside PTFE it is possible to extrude materials like for UHMW PE as well as their Compounds.

CommonTec RAM extrusion is characterised by high-quality mechanical engineering and innovative control and automatic systems. Most advanced control and safeguards methods guarantee a maximum of precision both with the pressing procedure as well as in the sinter zone. Pressure and speed governors let the pressing process adjust individually to the respective profile. The temperature zones can be adapted to the respective requirements separately steplessly. Speeds, pressures and temperatures in the individual zones are continuously supervised and regulated. In order to ensure a continuous quality, once determined profile data can be stored and reused. more ⇒